MAX4466 Electret Microphone Amplifier Module

  • Amplifier IC: Maxim MAX4466 (Op-Amp specifically optimized for microphone preamplification)

  • Microphone Type: Soldered 20Hz – 20kHz Electret Condenser Capsule

  • Adjustable Gain: 25x to 125x (Configurable via onboard trimmer potentiometer)

  • Operating Voltage Range: 2.4V to 5.5V DC (3.3V recommended for low power supply noise)

  • Output Type: Rail-to-Rail Analog Signal (DC Biased at $V_{CC}/2$)

  • Quiescent Current: Ultra-low 24 µA draw

  • Power Supply Rejection Ratio (PSRR): 112 dB (Excellent noise isolation from supply rails)

Out of stock

Description

The MAX4466 Electret Microphone Amplifier Module with Adjustable Gain is an analog sound-sensing breakout board designed for audio recording, voice detection, and audio-reactive microcontroller applications. Powered by Maxim’s MAX4466 operational amplifier, it delivers noise rejection and signal clarity compared to standard transistor-based microphone modules.

Featuring a 20Hz–20kHz electret microphone element paired with an onboard rear multi-turn trimmer pot, the gain can be adjusted from 25x to 125x. The analog output outputs a rail-to-rail $V_{CC}/2$ DC-biased audio waveform, making it directly compatible with the ADC pins of microcontrollers like Arduino, ESP32, and Raspberry Pi without requiring extra external components.

Additional information
Shipping Weight5 g
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “MAX4466 Electret Microphone Amplifier Module”

Your email address will not be published. Required fields are marked *

Applications
  • FFT-Based Music Visualizers & Audio Spectrum Analyzers

  • Voice-Activated Switches & Sound Level Monitors (Clap/Noise Triggers)

  • Voice Recording, Sampling, and Audio Monitoring Nodes

  • Smart Home Voice-Controlled IoT Projects

TECHNICAL SPECIFICATIONS
Feature / Specification Details
Amplifier IC Maxim MAX4466
Microphone Element Electret Condenser (20 Hz – 20 kHz Frequency Response)
Adjustable Gain Range 25x to 125x (Adjustable via rear potentiometer)
Operating Voltage 2.4V – 5.5V DC (3.3V recommended)
Quiescent Current 24 µA
Gain Bandwidth Product 600 kHz
Output Signal Type Analog Waveform (DC Biased at VCC/2)
Peak Output Swing Up to 5Vpp (Rail-to-Rail)
PSRR (Noise Rejection) 112 dB
Header Interface 3-Pin Male Header (VCC, GND, OUT - 2.54mm Pitch)
Module Dimensions 20 mm x 14 mm x 8 mm