CP2102 USB 2.0 to TTL UART (6 Pin) Serial Converter Module
₹162.00 (Incl of GST)
-
Bridge Controller IC: Silicon Labs CP2102 Single-Chip USB-to-UART Bridge
-
USB Interface: USB 2.0 Full-Speed Compliant (12 Mbps) with integrated USB Transceiver
-
TTL Output Header: Standard 6-Pin Female Header (
3.3V,RST,TXD,RXD,GND,5V/DTR) -
Logic Voltage Levels: Dual Power Output (3.3V and 5V) with 3.3V TTL signal levels
-
Baud Rates: 300 bps to 1.5 Mbps
-
Hardware Protection: Onboard 500mA Resettable PTC Fuse for USB port overcurrent protection
-
Status Indicators: Onboard LEDs for Power (PWR), Data Reception (RXD), and Data Transmission (TXD)
The CP2102 USB 2.0 to TTL UART (6 Pin) Serial Converter Module is a compact bridge board designed to facilitate serial communication between USB-enabled computers and TTL-level microcontrollers. Powered by the Silicon Labs CP2102 chip, it offers plug-and-play conversion, allowing legacy UART serial protocols to interface seamlessly via USB.
Equipped with a standard 6-pin connector, this module supplies both 3.3V and 5V power rails, making it suitable for programming and debugging microcontrollers like the Arduino Pro Mini, ESP8266, ESP32, STM32, and various GPS/GSM modules. Built-in RX/TX status LEDs provide visual confirmation during data transfer, while an integrated self-recovery fuse protects host USB ports against accidental short circuits.
PACKAGE INCLUDES:
- 1 x CP2102 USB 2.0 to TTL UART (6 Pin) Serial Converter Module
-
Programming Arduino Pro Mini, ESP8266, ESP32, and STM32 Microcontrollers
-
Serial Console Debugging for Raspberry Pi and Router Boards
-
Interfacing PC with GSM/GPRS, GPS, Bluetooth, and RFID Modules
-
Firmware Upgrades and Unbricking Network Equipment
| Feature / Specification | Details |
|---|---|
| Controller IC | Silicon Labs CP2102 |
| USB Standard | USB 2.0 Full Speed (12 Mbps) |
| Output Interface | 6-Pin Header (3.3V, RST/DTR, TXD, RXD, GND, 5V) |
| Output Voltage Rails | Dual 3.3V DC (up to 100mA) and 5V DC (up to 500mA) |
| Supported Baud Rates | 300 bps to 1.5 Mbps |
| Internal Buffers | 512-Byte Receive Buffer, 512-Byte Transmit Buffer |
| Protection | Onboard 500mA Self-Recovery Resettable Fuse |
| Status LEDs | Power (PWR), Transmit (TXD), Receive (RXD) |
| Supported OS | Windows 11/10/8/7/XP, macOS, Linux, Android |
| Operating Temperature | -40°C to +85°C |
| Board Dimensions | 42 mm x 15 mm (approx.) |

Reviews
There are no reviews yet.