Back to products
20mm-piezo-eletric-transducer
20mm Piezo Electric Transducer Element Original price was: ₹51.00.Current price is: ₹46.00. (Inclusive of GST)

YF-G1 DN25 1″ Water Flow Sensor

  • Rated Flow Range: 1–60 L/min
  • Working Voltage: DC 5–18V (typical: 5V)
  • Output Type: Hall Effect Pulse Output
  • Thread Size: DN25 / 1 inch
  • Maximum Operating Pressure: ≤1.75 MPa
  • Operating Temperature: 0–80°C
  • Storage Temperature: –20 to 100°C
  • Accuracy: ±10% (typical)
  • Pulse Frequency Formula:F (Hz) = (5.5 × Flow Rate L/min) ±10%
Description
  • The YF-G1 DN25 is a high-capacity Hall-effect water flow meter designed for domestic, industrial, and agricultural water measurement.
  • It consists of a plastic body, 1″ inlet/outlet threads, an internal rotor turbine, and an integrated Hall-effect sensor which outputs digital pulses proportional to water flow.
  • When water flows, the rotor spins and the Hall sensor generates pulses—these can be read by Arduino, ESP32, Raspberry Pi, PLCs, and other microcontrollers.
  • It supports high flow rates up to 60 L/min, making it suitable for overhead tanks, motor pumps, RO plants, boilers, chillers, and irrigation systems.
  • Highly durable and resistant to corrosion, suitable for long-term use with clean water.

PACKAGE INCLUDES:
  • 1 × YF-G1 DN25 Water Flow Sensor
  • 1 × Pre-attached wiring cable
Additional information
Weight250 g
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “YF-G1 DN25 1″ Water Flow Sensor”

Your email address will not be published. Required fields are marked *

Applications
  • Water flow measurement
  • Domestic water tank automation
  • Industrial cooling systems
  • RO/UV water purifiers
  • Irrigation & agriculture
  • Chillers & boilers
  • Flow-based motor protection
  • Smart water metering
  • Liquid dispensing systems
TECHNICAL SPECIFICATIONS
Parameter Specification
Model YF-G1
Pipe Size DN25 (1 Inch)
Flow Rate Range 1–60 L/min
Internal Rotor Material POM (Polyoxymethylene)
Body Material Nylon / Fiber-Reinforced Plastic
Seal Material Rubber O-Ring
Output Type Digital Square Wave Pulse
Output Duty Cycle Approx. 50%
Working Voltage DC 5–18V
Maximum Output Current 10 mA
Measurement Accuracy ±10%
Maximum Pressure Resistance ≤1.75 MPa
Cable Length Approx. 15–20 cm
Water Temperature Range 0°C to +80°C
Storage Temperature −20°C to +100°C
Connector Type 3-Pin (Red = VCC, Black = GND, Yellow = Pulse)
Pulse Constant Approx. 5.5 Hz per L/min