max98357A-full
MAX98357A I2S Digital Audio Amplifier Module Original price was: ₹253.00.Current price is: ₹230.00. (Incl of GST)
Back to products

INA219 I2C Voltage, Current and Power Sensor Module

₹180.00 (Incl of GST)

  • Measures DC bus voltage, current and power
  • INA219 digital power monitor IC
  • I2C / SMBus-compatible communication
  • Bus voltage measurement range: 0–26V
  • 12-bit ADC resolution
  • Bidirectional current measurement
  • Integrated current-sense shunt resistor on typical breakout boards
  • Compatible with Arduino, ESP32 and other I2C-enabled microcontrollers
  • Suitable for battery, power supply and energy-monitoring projects
Description

The INA219 Voltage, Current and Power Sensor Module is a compact monitoring solution for measuring electrical parameters in DC-powered electronic systems. It uses the INA219 digital power monitor IC from Texas Instruments to measure the voltage drop across a current-sense shunt resistor and the bus voltage supplied to a load.

The module communicates with a microcontroller through the I2C interface, allowing measured voltage, current and calculated power to be read digitally. This eliminates the need for separate analogue voltage and current measurement circuits in many applications.

The INA219 supports bus voltage measurements from 0V to 26V and bidirectional current monitoring, making it useful for observing current flowing into or out of a load. Typical applications include battery monitoring, DC power supplies, robotics, solar-powered electronics and embedded power-management systems.


PACKAGE INCLUDES:
  • 1 × INA219 Voltage, Current and Power Sensor Module
Additional information
Shipping Weight5 g
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “INA219 I2C Voltage, Current and Power Sensor Module”

Your email address will not be published. Required fields are marked *

Applications
  • DC battery voltage and current monitoring
  • Battery charging and discharging analysis
  • Arduino and ESP32 power-monitoring projects
  • Solar power and low-voltage energy monitoring
  • DC power supply testing
  • Robotics and motor power monitoring
  • IoT energy-monitoring systems
  • Embedded power management
  • Portable electronics
  • Educational electronics and laboratory projects
TECHNICAL SPECIFICATIONS
  • Product name: INA219 Voltage, Current and Power Sensor Module
  • Sensor IC: INA219
  • Manufacturer of IC: Texas Instruments
  • Measurement type: DC bus voltage, shunt voltage, current and power
  • Bus voltage range: 0–26V
  • Supply voltage for IC: 3.0–5.5V
  • Communication interface: I2C / SMBus
  • ADC resolution: 12-bit
  • Current measurement: Bidirectional
  • Voltage measurement: Bus voltage and shunt voltage
  • Power measurement: Calculated internally using measurement registers
  • Programmable I2C addresses: Up to 16 address combinations supported by the IC
  • Maximum common-mode bus voltage: 26V
  • IC operating temperature: -40°C to +125°C
  • Typical breakout-board shunt resistor: Often 0.1Ω; verify the actual board
Datasheet

INA219