AMS1117 3.3V DC-DC Step-Down Linear Power Supply Module
₹20.00 (Incl of GST)
-
Onboard Regulator IC: AMS1117-3.3 Low-Dropout (LDO) Linear Voltage Regulator
-
Input Voltage Range (VIN): 4.5V to 12.0V DC (5.0V DC Recommended to Minimize Heat)
-
Output Voltage (VOUT): Fixed 3.3V DC (+/- 1.5% Accuracy)
-
Maximum Output Current: Up to 800mA Continuous (1.0A Peak at Low VIN)
-
Dropout Voltage: 1.1V Typical to 1.3V Max
-
Onboard Components: Input/Output SMD Filter Capacitors & Red Power Indicator LED
-
Header Interface: 2.54mm (0.1-inch) Pitch Male Pin Headers (Breadboard-Friendly)
-
Board Dimensions: Approx. 25mm x 11mm x 7mm (26mm x 12mm PCB Footprint)
The AMS1117 3.3V DC-DC Step-Down Linear Power Supply Module is a compact, breadboard-ready low-dropout (LDO) voltage regulator breakout board that converts a 4.5V to 12V DC input into a clean, stable 3.3V DC rail at up to 800mA. Unlike switching buck converters that introduce high-frequency ripple, this linear module delivers a low-noise 3.3V output suited for sensitive wireless transceivers and analog sensors.
Pre-assembled with SMD decoupling capacitors, a red power status LED, and standard 2.54mm pitch header pins, it plugs directly into solderless breadboards or female jumper leads. It’s an easy way to power ESP8266 (ESP-01), nRF24L01+, LoRa, and 3.3V I2C/SPI modules from a 5V Arduino or USB supply without browning out the board’s weak onboard 3.3V pin.
PACKAGE INCLUDES:
- 1 x AMS1117 3.3V DC-DC Step-Down Linear Power Supply Module
| Shipping Weight | 5 g |
|---|
-
Dedicated 3.3V Power Supply for ESP8266 (ESP-01), nRF24L01+, & LoRa Modules
-
5V Arduino UNO / Mega to 3.3V Sensor & SD Card Power Conversion
-
Solderless Breadboard Prototyping & Custom DIY Project Power Rails
-
Low-Noise Power Supply for Analog Sensors & Microphone Preamps
| Feature / Specification | Details |
|---|---|
| Product Name | AMS1117 3.3V DC-DC Step-Down Linear Power Supply Module (800mA) |
| Regulator IC | AMS1117-3.3 Low-Dropout (LDO) Linear Regulator |
| Input Voltage Range (VIN) | 4.5V to 12.0V DC (5.0V Nominal Recommended) |
| Output Voltage (VOUT) | 3.3V DC Fixed (+/- 1.5% Tolerance) |
| Maximum Output Current | 800mA Continuous (1.0A Peak when VIN is 4.5V–5V) |
| Dropout Voltage | 1.1V Typical | 1.3V Max |
| Onboard Indicators & Filtering | Red Power Status LED + Input/Output SMD Filter Capacitors |
| Built-In Protection | On-Chip Thermal Shutdown & Short-Circuit Current Limiting |
| Pin Header Pitch | 2.54mm (0.1-inch) Standard Breadboard Header Pins |
| PCB Dimensions & Weight | Approx. 25mm x 11mm x 7mm (26mm x 12mm PCB) | ~2g |
| Operating Temperature | -40°C to +125°C (IC Junction) |

Reviews
There are no reviews yet.