3.7V 800mAh Rechargeable LiPo Battery
₹330.00 (Incl of GST)
-
Battery Chemistry: Lithium-Ion Polymer (LiPo / 1S1P Pouch Cell)
-
Nominal Voltage & Capacity: 3.7V DC | 800mAh (2.96Wh Energy Rating)
-
Charging Voltage (Full): 4.2V DC Max (CC/CV Lithium Charger Required)
-
Discharge Cut-Off Voltage: 3.0V DC (Protected by Built-In PCM)
-
Standard Charge / Discharge Rate: 0.5C (400mA) Max Charge | 1C (800mA) Max Continuous Discharge
-
Built-In Protection (PCM): Integrated Protection Circuit Module under Kapton Tape (Over-Charge, Over-Discharge, Over-Current, & Short-Circuit Protection)
-
Connector / Termination: 2-Pin JST Connector (2.0mm JST-PH Pitch)
-
Lead Polarity & Weight: Red Wire = Positive (+) | Black Wire = Negative (-) | Approx. 14g to 18g
The 3.7V 800mAh Rechargeable LiPo Battery is a compact, lightweight lithium polymer pouch cell built for space-constrained electronics, wearables, and microcontroller projects. Delivering 2.96Wh of stored energy in a flat profile, it fits easily inside slim 3D-printed housings, small IoT sensor nodes, and handheld gadgets.
An integrated Protection Circuit Module (PCM) sealed beneath Kapton insulation tape protects the cell against over-charging above 4.2V, deep discharging below 3.0V, and accidental short circuits. Pre-terminated with a 2-pin JST connector and color-coded Red (+) and Black (-) silicone leads, it plugs cleanly into ESP32/Arduino battery boards, TP4056 charger modules, and portable audio circuits.
PACKAGE INCLUDES:
- 1 x 3.7V 800mAh Rechargeable LiPo Battery (with Built-In PCM & 2-Pin JST Connector)
| Shipping Weight | 20 g |
|---|
-
Compact ESP32, Arduino, & Raspberry Pi Pico IoT Nodes
-
Wearable Devices, Smart Badges, & Miniature GPS Trackers
-
Mini Bluetooth Speakers, Wireless Headphones, & MP3 Players
-
Replacement 3.7V 800mAh Cell for Small Toys & Portable Sensors
| Feature / Specification | Details |
|---|---|
| Product Name | 3.7V 800mAh Rechargeable LiPo Battery with Protection PCB & JST Connector |
| Battery Chemistry | Lithium-Ion Polymer (LiPo / 1S1P Pouch Cell) |
| Nominal Voltage | 3.7V DC (Operating Range: 3.0V – 4.2V) |
| Nominal Capacity & Energy | 800mAh | 2.96Wh |
| Full Charge Voltage | 4.2V DC +/- 0.05V (CC/CV Charging Method) |
| Over-Discharge Cut-Off | 3.0V DC (Automatic PCM Cut-Off) |
| Charge & Discharge Current | Max Charge: 0.5C (400mA) | Max Continuous Discharge: 1C (800mA) |
| Built-In Safety Circuit | Integrated PCM under Kapton Tape (Over-Charge, Over-Discharge, Over-Current, Short-Circuit) |
| Output Connector & Polarity | 2-Pin JST Connector (2.0mm Pitch) | Red = + Positive, Black = - Negative |
| Typical Dimensions & Weight | Approx. 35mm x 25mm x 8mm (802535) or 48mm x 30mm x 5mm (503048) | ~14g–18g |
| Operating Temperature | Charging: 0°C to +45°C | Discharging: -20°C to +60°C |

Reviews
There are no reviews yet.