PAM8403 3W+3W Stereo Class-D Amplifier Board with Switch Potentiometer
₹66.00 (Incl of GST)
-
Main Amplifier IC: PAM8403 Dual-Channel Class-D Stereo Audio Amplifier
-
Operating Voltage Range (VCC): 2.5V to 5.5V DC (5.0V DC Recommended; Do Not Exceed 5.5V)
-
Maximum Output Power: 3W + 3W (6W Total) into 4-Ohm Load at 5V (Approx. 1.5W + 1.5W into 8-Ohm)
-
Supported Speaker Impedance: 4 Ohms to 8 Ohms
-
Onboard Control: Rotary Volume Potentiometer Knob with Integrated Power ON/OFF Click Switch
-
Efficiency & Architecture: Up to 85%–90% Efficiency | Filterless Bridge-Tied-Load (BTL) Output
-
Power Supply Filtering: Upgraded 470uF Electrolytic Decoupling Capacitor
The PAM8403 3W+3W Stereo Class-D Amplifier Board with Switch Potentiometer is an ultra-compact, high-efficiency digital stereo amplifier built for portable Bluetooth speakers, desktop mini-speakers, and battery-powered audio projects. Running on 2.5V to 5.5V DC, it drives two 4-ohm 3W speakers directly without bulky external output filters or heatsinks while achieving up to 90% efficiency.
An onboard rotary volume potentiometer with an integrated click-action ON/OFF switch lets you power the board on and adjust sound levels cleanly without extra external switches. Equipped with an upgraded 470uF power filter capacitor, built-in short-circuit protection, and thermal shutdown, it delivers clear, low-noise stereo amplification from a single 3.7V LiPo cell, 18650 battery, or 5V USB supply.
PACKAGE INCLUDES:
- 1 x PAM8403 5V 3W+3W Stereo Class-D Amplifier Module with Volume Knob & Switch
| Shipping Weight | 10 g |
|---|
-
DIY Portable Bluetooth Speakers & USB-Powered Desktop Speakers
-
Arduino, ESP32, & Raspberry Pi Stereo Audio Output Projects
-
Custom Boomboxes, Arcade Cabinets, & Retro Radio Upgrades
-
Talking Robots, Interactive Kiosks, & Battery-Powered Sound Boxes
| Feature / Specification | Details |
|---|---|
| Product Name | PAM8403 5V 3W+3W Stereo Class-D Audio Amplifier Module with Volume Knob & Power Switch |
| Amplifier IC & Class | PAM8403 | Dual-Channel Class-D Digital Stereo Amplifier |
| Operating Voltage (VCC) | 2.5V to 5.5V DC (5.0V DC USB / 3.7V Li-Ion Recommended) |
| Maximum Output Power | 3W + 3W @ 4-Ohm, 5V (10% THD) | ~1.5W + 1.5W @ 8-Ohm, 5V |
| Compatible Speaker Load | 4 Ohms to 8 Ohms (Direct BTL Drive, No LC Filter Required) |
| Efficiency & Gain | Up to 90% Efficiency | 24dB Maximum Closed-Loop Gain |
| Signal-to-Noise & Distortion | SNR: >80dB–90dB | THD+N: <0.15% at 1W |
| Frequency Response | 150Hz to 20kHz |
| Controls & Filtering | Rotary Volume Knob with Built-In Power ON/OFF Switch + 470uF Filter Capacitor |
| Built-In Protections | Output Short-Circuit Protection & Thermal Overload Shutdown |
| Dimensions & Weight | Approx. 30mm x 22mm x 16mm (Including Knob) | ~8g |

Reviews
There are no reviews yet.