AMS1117 3.3V DC-DC Step-Down Linear Power Supply Module

₹20.00 (Incl of GST)

  • Onboard Regulator IC: AMS1117-3.3 Low-Dropout (LDO) Linear Voltage Regulator

  • Input Voltage Range (VIN): 4.5V to 12.0V DC (5.0V DC Recommended to Minimize Heat)

  • Output Voltage (VOUT): Fixed 3.3V DC (+/- 1.5% Accuracy)

  • Maximum Output Current: Up to 800mA Continuous (1.0A Peak at Low VIN)

  • Dropout Voltage: 1.1V Typical to 1.3V Max

  • Onboard Components: Input/Output SMD Filter Capacitors & Red Power Indicator LED

  • Header Interface: 2.54mm (0.1-inch) Pitch Male Pin Headers (Breadboard-Friendly)

  • Board Dimensions: Approx. 25mm x 11mm x 7mm (26mm x 12mm PCB Footprint)

Description

The AMS1117 3.3V DC-DC Step-Down Linear Power Supply Module is a compact, breadboard-ready low-dropout (LDO) voltage regulator breakout board that converts a 4.5V to 12V DC input into a clean, stable 3.3V DC rail at up to 800mA. Unlike switching buck converters that introduce high-frequency ripple, this linear module delivers a low-noise 3.3V output suited for sensitive wireless transceivers and analog sensors.

Pre-assembled with SMD decoupling capacitors, a red power status LED, and standard 2.54mm pitch header pins, it plugs directly into solderless breadboards or female jumper leads. It’s an easy way to power ESP8266 (ESP-01), nRF24L01+, LoRa, and 3.3V I2C/SPI modules from a 5V Arduino or USB supply without browning out the board’s weak onboard 3.3V pin.


PACKAGE INCLUDES:
  • 1 x AMS1117 3.3V DC-DC Step-Down Linear Power Supply Module
Additional information
Shipping Weight5 g
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “AMS1117 3.3V DC-DC Step-Down Linear Power Supply Module”

Your email address will not be published. Required fields are marked *

Applications
  • Dedicated 3.3V Power Supply for ESP8266 (ESP-01), nRF24L01+, & LoRa Modules

  • 5V Arduino UNO / Mega to 3.3V Sensor & SD Card Power Conversion

  • Solderless Breadboard Prototyping & Custom DIY Project Power Rails

  • Low-Noise Power Supply for Analog Sensors & Microphone Preamps

TECHNICAL SPECIFICATIONS
Feature / Specification Details
Product Name AMS1117 3.3V DC-DC Step-Down Linear Power Supply Module (800mA)
Regulator IC AMS1117-3.3 Low-Dropout (LDO) Linear Regulator
Input Voltage Range (VIN) 4.5V to 12.0V DC (5.0V Nominal Recommended)
Output Voltage (VOUT) 3.3V DC Fixed (+/- 1.5% Tolerance)
Maximum Output Current 800mA Continuous (1.0A Peak when VIN is 4.5V–5V)
Dropout Voltage 1.1V Typical | 1.3V Max
Onboard Indicators & Filtering Red Power Status LED + Input/Output SMD Filter Capacitors
Built-In Protection On-Chip Thermal Shutdown & Short-Circuit Current Limiting
Pin Header Pitch 2.54mm (0.1-inch) Standard Breadboard Header Pins
PCB Dimensions & Weight Approx. 25mm x 11mm x 7mm (26mm x 12mm PCB) | ~2g
Operating Temperature -40°C to +125°C (IC Junction)