3.7V 800mAh Rechargeable LiPo Battery

₹330.00 (Incl of GST)

  • Battery Chemistry: Lithium-Ion Polymer (LiPo / 1S1P Pouch Cell)

  • Nominal Voltage & Capacity: 3.7V DC | 800mAh (2.96Wh Energy Rating)

  • Charging Voltage (Full): 4.2V DC Max (CC/CV Lithium Charger Required)

  • Discharge Cut-Off Voltage: 3.0V DC (Protected by Built-In PCM)

  • Standard Charge / Discharge Rate: 0.5C (400mA) Max Charge | 1C (800mA) Max Continuous Discharge

  • Built-In Protection (PCM): Integrated Protection Circuit Module under Kapton Tape (Over-Charge, Over-Discharge, Over-Current, & Short-Circuit Protection)

  • Connector / Termination: 2-Pin JST Connector (2.0mm JST-PH Pitch)

  • Lead Polarity & Weight: Red Wire = Positive (+) | Black Wire = Negative (-) | Approx. 14g to 18g

Description

The 3.7V 800mAh Rechargeable LiPo Battery is a compact, lightweight lithium polymer pouch cell built for space-constrained electronics, wearables, and microcontroller projects. Delivering 2.96Wh of stored energy in a flat profile, it fits easily inside slim 3D-printed housings, small IoT sensor nodes, and handheld gadgets.

An integrated Protection Circuit Module (PCM) sealed beneath Kapton insulation tape protects the cell against over-charging above 4.2V, deep discharging below 3.0V, and accidental short circuits. Pre-terminated with a 2-pin JST connector and color-coded Red (+) and Black (-) silicone leads, it plugs cleanly into ESP32/Arduino battery boards, TP4056 charger modules, and portable audio circuits.


PACKAGE INCLUDES:
  • 1 x 3.7V 800mAh Rechargeable LiPo Battery (with Built-In PCM & 2-Pin JST Connector)
Additional information
Shipping Weight20 g
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “3.7V 800mAh Rechargeable LiPo Battery”

Your email address will not be published. Required fields are marked *

Applications
  • Compact ESP32, Arduino, & Raspberry Pi Pico IoT Nodes

  • Wearable Devices, Smart Badges, & Miniature GPS Trackers

  • Mini Bluetooth Speakers, Wireless Headphones, & MP3 Players

  • Replacement 3.7V 800mAh Cell for Small Toys & Portable Sensors

TECHNICAL SPECIFICATIONS
Feature / Specification Details
Product Name 3.7V 800mAh Rechargeable LiPo Battery with Protection PCB & JST Connector
Battery Chemistry Lithium-Ion Polymer (LiPo / 1S1P Pouch Cell)
Nominal Voltage 3.7V DC (Operating Range: 3.0V – 4.2V)
Nominal Capacity & Energy 800mAh | 2.96Wh
Full Charge Voltage 4.2V DC +/- 0.05V (CC/CV Charging Method)
Over-Discharge Cut-Off 3.0V DC (Automatic PCM Cut-Off)
Charge & Discharge Current Max Charge: 0.5C (400mA) | Max Continuous Discharge: 1C (800mA)
Built-In Safety Circuit Integrated PCM under Kapton Tape (Over-Charge, Over-Discharge, Over-Current, Short-Circuit)
Output Connector & Polarity 2-Pin JST Connector (2.0mm Pitch) | Red = + Positive, Black = - Negative
Typical Dimensions & Weight Approx. 35mm x 25mm x 8mm (802535) or 48mm x 30mm x 5mm (503048) | ~14g–18g
Operating Temperature Charging: 0°C to +45°C | Discharging: -20°C to +60°C