BTS7960 43A High Power DC Motor Driver Module

₹363.00 (Incl of GST)

  • Driver IC: Dual Infineon BTS7960 High-Current Half-Bridge ICs (Full H-Bridge Configuration)

  • Peak Output Current: Up to 43A (with Built-In Aluminum Heatsink)

  • Motor Supply Voltage (B+ / B-): 5.5V to 27V DC (Nominal 6V–27V DC)

  • Logic Supply & Signal Level: 3.3V to 5V Compatible (with 74HC244 Schmitt-Trigger Buffer Isolation)

  • PWM Frequency Support: Up to 25 kHz (0% to 100% Duty Cycle)

  • Control Interface: 8-Pin Header (RPWM, LPWM, R_EN, L_EN, R_IS, L_IS, VCC, GND — requires only 4 MCU lines)

  • Protection Features: Over-Temperature, Over-Voltage, Under-Voltage, Over-Current, & Short-Circuit Protection

  • Module Dimensions: Approx. 50 mm x 50 mm x 43 mm (PCB Footprint: ~40 mm x 50 mm)

Description

The BTS7960 43A High Power DC Motor Driver Module (commonly known as the IBT-2) is an industrial-grade full H-bridge motor controller engineered for high-torque, high-current brushed DC motors. Built around two Infineon BTS7960 integrated half-bridge driver chips and paired with a large rear-mounted aluminum heatsink, it delivers up to 43A peak current across a 5.5V to 27V DC motor power range with smooth forward, reverse, coasting, and active braking control.

To protect sensitive microcontrollers from high-voltage transients and EMI, the board incorporates an onboard 74HC244 octal buffer/line driver for 5V/3.3V logic isolation. Requiring as few as four control lines from an Arduino, ESP32, Raspberry Pi, or STM32, it supports PWM frequencies up to 25 kHz for quiet, responsive speed regulation and features dual current-sense alarm outputs (R_IS, L_IS) alongside thermal, over-voltage, under-voltage, and short-circuit shutdown safeguards.


PACKAGE INCLUDES:
  1. 1 x BTS7960 43A High-Power H-Bridge DC Motor Driver Module (with Pre-Attached Heatsink)
Additional information
Shipping Weight60 g
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BTS7960 43A High Power DC Motor Driver Module”

Your email address will not be published. Required fields are marked *

Applications

Combat Robots, Heavy-Duty Rover Chassis, & High-Torque 775/555 DC Motor Drives

Electric Vehicle (EV) Prototypes, E-Bike & Ride-On Toy Motor Controllers

Linear Actuators, Winches, & Automated Conveyor Belt Systems

DIY Force-Feedback (FFB) Sim-Racing Steering Wheels & Industrial Automation

TECHNICAL SPECIFICATIONS
Feature / Specification Details
Model / Part Reference BTS7960 / IBT-2 High-Power Motor Driver Module
Driver Architecture Dual BTS7960 Half-Bridge ICs (Full H-Bridge Configuration)
Motor Supply Voltage (B+ / B-) 5.5V to 27V DC (Recommended: 6V – 27V DC)
Maximum Peak Current 43A
Logic Supply Voltage (VCC) 5V DC (Isolated via onboard 74HC244 buffer IC)
Control Input Logic Level 3.3V to 5V TTL / CMOS Compatible
PWM Frequency & Duty Cycle Up to 25 kHz | 0% to 100% Duty Cycle
On-State Path Resistance 16 mOhm (Typical at 25°C)
Built-In Protections Over-Temperature, Over-Voltage Lockout, Under-Voltage Shutdown, Over-Current & Short-Circuit Protection
Indicators & Cooling Onboard 5V Power LED + Pre-Mounted Aluminum Heatsink
Overall Dimensions & Weight 50 mm x 50 mm x 43 mm | Approx. 66g