CP2102 USB 2.0 to TTL UART (6 Pin) Serial Converter Module

₹162.00 (Incl of GST)

  • Bridge Controller IC: Silicon Labs CP2102 Single-Chip USB-to-UART Bridge

  • USB Interface: USB 2.0 Full-Speed Compliant (12 Mbps) with integrated USB Transceiver

  • TTL Output Header: Standard 6-Pin Female Header (3.3V, RST, TXD, RXD, GND, 5V / DTR)

  • Logic Voltage Levels: Dual Power Output (3.3V and 5V) with 3.3V TTL signal levels

  • Baud Rates: 300 bps to 1.5 Mbps

  • Hardware Protection: Onboard 500mA Resettable PTC Fuse for USB port overcurrent protection

  • Status Indicators: Onboard LEDs for Power (PWR), Data Reception (RXD), and Data Transmission (TXD)

Description

The CP2102 USB 2.0 to TTL UART (6 Pin) Serial Converter Module is a compact bridge board designed to facilitate serial communication between USB-enabled computers and TTL-level microcontrollers. Powered by the Silicon Labs CP2102 chip, it offers plug-and-play conversion, allowing legacy UART serial protocols to interface seamlessly via USB.

Equipped with a standard 6-pin connector, this module supplies both 3.3V and 5V power rails, making it suitable for programming and debugging microcontrollers like the Arduino Pro Mini, ESP8266, ESP32, STM32, and various GPS/GSM modules. Built-in RX/TX status LEDs provide visual confirmation during data transfer, while an integrated self-recovery fuse protects host USB ports against accidental short circuits.


PACKAGE INCLUDES:
  • 1 x CP2102 USB 2.0 to TTL UART (6 Pin) Serial Converter Module
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “CP2102 USB 2.0 to TTL UART (6 Pin) Serial Converter Module”

Your email address will not be published. Required fields are marked *

Applications
  • Programming Arduino Pro Mini, ESP8266, ESP32, and STM32 Microcontrollers

  • Serial Console Debugging for Raspberry Pi and Router Boards

  • Interfacing PC with GSM/GPRS, GPS, Bluetooth, and RFID Modules

  • Firmware Upgrades and Unbricking Network Equipment

TECHNICAL SPECIFICATIONS
Feature / Specification Details
Controller IC Silicon Labs CP2102
USB Standard USB 2.0 Full Speed (12 Mbps)
Output Interface 6-Pin Header (3.3V, RST/DTR, TXD, RXD, GND, 5V)
Output Voltage Rails Dual 3.3V DC (up to 100mA) and 5V DC (up to 500mA)
Supported Baud Rates 300 bps to 1.5 Mbps
Internal Buffers 512-Byte Receive Buffer, 512-Byte Transmit Buffer
Protection Onboard 500mA Self-Recovery Resettable Fuse
Status LEDs Power (PWR), Transmit (TXD), Receive (RXD)
Supported OS Windows 11/10/8/7/XP, macOS, Linux, Android
Operating Temperature -40°C to +85°C
Board Dimensions 42 mm x 15 mm (approx.)