GP2Y1010AU0F PM2.5 Dust Smoke Particle Sensor
- Operating Voltage: 5V DC
- Output Type: Analog voltage (0–3.6V typical)
- Detection Range: 0–0.5 mg/m³
- Sensitivity: 0.5V per 0.1 mg/m³ (approx.)
- Average Current Consumption: 20 mA
- Peak LED Current: ~80 mA (pulse)
- Interface: Analog Output
- Sensor Type: Optical Air Quality / Dust Sensor
- Particle Detection: PM2.5, smoke, pollen, fine dust
Description
- The GP2Y1010AU0F is an optical dust sensor by Sharp, designed to detect fine particles such as PM2.5, smoke, and airborne dust.
- Â It contains an infrared LED and phototransistor arranged diagonally, allowing light-scattering detection when dust passes inside the chamber.
- The sensor outputs a voltage proportional to dust concentration, making it ideal for microcontroller-based air quality monitoring systems.
- Works with Arduino, ESP8266, ESP32, STM32, Raspberry Pi, and most analog-reading controllers.
PACKAGE INCLUDES:
- 1 × GP2Y1010AU0F Dust Sensor Module
- 1 × 6-Pin Cable (JST)
- 1 × Mounting Screws
Additional information
| Weight | 10 g |
|---|
Reviews (0)
Applications
- PM2.5 Air Quality Monitors
• Smoke Detectors
• HVAC Air Purifiers
• Smart Homes Air Monitoring
• Industrial Dust Sensing
• Pollution Detection Instruments
• IoT Environmental Stations
• Car Cabin Air Quality Systems
TECHNICAL SPECIFICATIONS
| Parameter | Specification |
|---|---|
| Model | GP2Y1010AU0F |
| Supply Voltage | 5V DC ±10% |
| Operating Current | Typical 20 mA |
| Output Voltage | 0–3.6V (Analog Output) |
| Maximum Measurable Dust Density | Approx. 0.5 mg/m³ |
| Sensitivity | 0.5V / 0.1 mg/m³ |
| Infrared LED Peak Wavelength | 940 nm |
| Recommended LED Pulse Timing | 10 ms ON / 1 ms OFF |
| Operating Temperature | −10°C to +65°C |
| Connector | 6-Pin JST Connector |
| Module Dimensions | Approx. 46 × 30 × 17.6 mm |
Reviews
There are no reviews yet.