100K Ohm (B100K) Linear Rotary Potentiometer
₹25.00 (Incl of GST)
-
Resistance Value & Code: 100kOhm (100,000 Ohms | Marked B100K / 100KB)
-
Resistance Taper: Type B Linear Taper (Proportional Resistance Change Across Rotation)
-
Pin Configuration: 3-Pin Single-Gang Through-Hole (Breadboard & PCB Compatible)
-
Tolerance & Power Rating: +/- 20% Resistance Tolerance | 0.125W to 0.5W Rated Power
-
Mechanical Rotation Angle: 270° to 300° Single-Turn Travel
-
Shaft Style & Diameter: 6mm Knurled / D-Type Shaft (13mm–15mm Length) for Push-On Control Knobs
-
Body Size & Mounting: 16mm Metal/Carbon Film Body with 7mm Threaded Bushing, Nut, & Washer
-
Rotational Life: >10,000 Cycles
The 100K Ohm Linear Taper 16mm Rotary Potentiometer is a 3-terminal single-turn variable resistor suited for low-current voltage division, audio tone shaping, and RC timing circuits. Compared to a 10K pot, its higher 100kOhm resistive track draws one-tenth the quiescent current, making it ideal for battery-powered microcontroller projects, 555 timer frequency adjusters, and high-impedance analog stages.
Featuring a Type B linear taper with smooth 270°–300° rotation, it includes a 16mm body, a threaded panel-mount bushing with hex nut and washer, and a standard 6mm shaft that accepts push-on potentiometer knobs.
PACKAGE INCLUDES:
- 1 x 100K Ohm (B100K) Linear Rotary Potentiometer
- 1 x Panel Mounting Hex Nut & Flat Washer
| Shipping Weight | 15 g |
|---|
-
555 Timer Frequency & PWM Duty-Cycle Adjustment Circuits
-
Audio Tone Controls (Bass/Treble), Mixers, & Op-Amp Gain Dials
-
Battery-Powered Microcontroller Analog Inputs & Sensor Threshold Tuning
-
TRIAC Light Dimmers, Synthesizers, & Custom Control Panels
| Feature / Specification | Details |
|---|---|
| Product Name | 100K Ohm (B100K) Linear Rotary Potentiometer – 3-Pin Panel Mount |
| Nominal Resistance | 100kOhm (100,000 Ohms) |
| Taper Curve | Linear Taper (Type B / Marked B100K) |
| Resistance Tolerance | +/- 20% |
| Rated Power & Max Voltage | 0.125W to 0.5W | Up to 150V–200V DC Max |
| Terminal Configuration | 3-Pin Single-Gang Through-Hole Solder Lugs |
| Total Rotation Angle | 270° to 300° +/- 5° (Single-Turn) |
| Shaft Dimensions | 6mm Diameter (Knurled / D-Shaft) x 13mm–15mm Length |
| Body & Panel Hole Size | 16mm Body Diameter | 7mm–7.5mm Panel Mounting Hole |
| Mechanical Life & Temp | >10,000 Cycles | -10°C to +70°C Operating Temperature |

Reviews
There are no reviews yet.