3S 20A 11.1V/12.6V Lithium Battery Protection Board (BMS)
₹84.00 (Incl of GST)
-
Cell Configuration: 3S (Designed for three 3.6V/3.7V Lithium-Ion or LiPo cells connected in series)
-
Peak Discharge Current: 20A (Continuous upper limit: 20A with sufficient cooling)
-
Peak Instantaneous Current: 40A – 60A (Surge/Motor start tolerance under 60A)
-
Full Charging Voltage: 12.6V – 13.0V DC
-
Protection Features: Overcharge, Over-discharge, Overcurrent, Short-Circuit protection, and Auto-Recovery
The 3S 20A 11.1V/12.6V Lithium Battery Protection Board (BMS) is an essential protection circuit module designed to manage and safeguard 3-cell series Li-ion and LiPo battery packs. Built with low internal resistance MOSFETs and precision IC voltage sensing, it prevents permanent damage, cell degradation, and safety hazards caused by overcharging, excessive discharge, high current overloads, or short circuits.
This module automatically monitors each individual cell tapping node (0V, 4.2V, 8.4V, 12.6V) and isolates the pack from the load or charger when electrical boundaries are breached. It is widely used for converting 12V power tools (like cordless drills), powering 12V LED arrays, DIY power banks, RC models, and robotics.
PACKAGE INCLUDES:
- 1 x 3S 20A 11.1V/12.6V Li-ion Lithium Battery Protection Board PCB Module
| Shipping Weight | 10 g |
|---|
-
12V Cordless Drills, Screwdrivers, and Electric Power Tools
-
3S 18650/21700 Lithium-Ion Custom 12V Battery Assemblies
-
RC Cars, Drones, Boats, and Robotics
-
12V Portable Audio Amplifiers and Bluetooth Speakers
-
Backup Power for LED Strip Lights and Solar Storage
| Feature / Specification | Details |
|---|---|
| Compatible Battery Chemistry | Li-Ion / LiPo (3.6V / 3.7V nominal per cell) |
| Cell Configuration | 3S (Three cells in series) |
| Nominal Pack Voltage | 11.1V – 12.0V |
| Charging Voltage Range | 12.6V to 13.0V DC |
| Max Continuous Discharge Current | 20A (Requires heat dissipation for maximum continuous load) |
| Continuous Charging Current | 10A max |
| Overcharge Voltage Cut-Off | 4.25V ± 0.025V (per cell) |
| Over-Discharge Voltage Cut-Off | 2.50V – 3.00V ± 0.05V (per cell) |
| Quiescent Current (Static Drain) | < 10 µA |
| Dimensions | 59 mm x 20 mm x 3.4 mm (approx.) |
| Operating Temperature | -40°C to +50°C |

Reviews
There are no reviews yet.